Travel / Cosmetic Bags

I’ve been trialling some free patterns that I have found online, and the hands down winner has to be Deby’s pattern from So Sew Easy, the Zipper Pouch   The pattern is for a mini zipper pouch, but I made it larger and it has turned out great.

The first two I made are patterns from different bloggers, but both times the inside seams were unfinished, and to me that is a bit unprofessional, I like things to be neat – but hey they’re OK.  The third one is a keeper!

IMG_0237

First – vinyl lined (first and last time using vinyl – it’s not easy!)

IMG_0244

Second, Retro Caravan theme

IMG_0243

Third following the so sew easy pattern – Great

IMG_0248

The three together

Advertisements

Going loco down in Acapulco

Started this little project last night and just finished it now, a small vinyl lined cosmetic bag (well, you could use it for anything really!)

I love this Acapulco fabric, I wished the same could be said for vinyl, that is really…. well let’s just say it’s not easy!

washbag

Three bags full!

I have just finished the 3rd “I’m not a camera bag” this one has some changes – On the outside I have a zip pocket, along with a slip pocket.  I decided that the internal pockets were a bit fiddly to get to, so better on the outside.  I added a bit more padding to the inner sections for protection.

I am loving these as they really look pretty and not at all like a camera bag!

3_bag

I’m not a camera bag – No.3

Inserting a zipper pocket tutorial

A zipper pocket when you first look at it, appears to be a daunting task.  I remember when I first read a tutorial, it had me baffled (and this was only 3 months ago).  There are many tutorials on the net, so I thought I would jump on board too.  I love creating these pockets, there is something satisfying about them, I seem to be adding zips to everything.

So here is a quick picture tutorial of how it is done.  Unfortunately I didn’t take a photo of the layout of fabric  and drawn box (but have made a quick mock up to show you what it’s like).

Measure and cut your pocket fabric.  The pocket lining needs to be fairly long as you will fold it up and enclose it to make the actual pocket / lining.  Mine was around 5 1/2″ wide by 10″ long, it must be narrower than your main fabric, that will be on the top.  With right sides together, place the pocket fabric roughly where you want the pocket opening to be.  I wanted mine at the half way point.

Draw a rectangular box  about 5/8″ down from the top of the pocket fabric, with the length you want your zipper to be, mine was around 4 1/2″ and the height I always mark 1/2″ this is where your zip will be placed.  Draw a central line, this is where you will make your cut, along with some ‘Y’ diagonal lines at either end into the corners, so you get a clean squared off corners (well, as can be).

IMG_0220

Draw a rectangular box, which should be the width of the opening you require, and the height is 1/2″ which will surround the zipper

Sew around the drawn box

Stitch around the border of your drawn box. Note when turning the corners, ensure your needle is down position all the way through the fabric

Continue all of the way around until you reach your stitch start point.

IMG_0194

Here is what it will look like

IMG_0196

Carefully make an incision on the centre line and cut along the this line all the way to the beginning of the ‘Y’ point

IMG_0198

Using a sharp knife of scissors carefully cut along the diagonal lines, close to the stitches, down to the centre line

IMG_0199

Feed the inner pocket piece through the hole, to the back of your main section

IMG_0200

Should look something like this!

IMG_0201

Here is what the reverse (wrong side) will look like. Don’t worry too much about the neatness, it will be ironed and stitched up and won’t be seen!

IMG_0202

Iron it out flat as can be

IMG_0204

Next take your zipper, and place it under your fabric, within the gap you have just created

IMG_0205

So it looks like this, ensure the zipper pull is within the opening

IMG_0207

Next take some masking tape, to hold the zip in position, it is easier than attempting to pin it in place!

IMG_0208

Sew a 1/8″ seam around the opening, to fix the zip in place, just remove the tape out of the way as you sew. You can use a zipper foot, but I find it just as easy to use my standard foot

IMG_0210

This is what it will look like from the outside, fairly neat ay!

IMG_0212

Turn the fabric over to the wrong side, you will see you have quite a bit of excess zip. Trim this away with scissors, fairly close to the stitching.

IMG_0213

This is what it will look like

IMG_0214

Take the pocket section and match the bottom edge with the top edge of the zipper. Pin in place.

IMG_0216

Stitch a 1/8″ seam all around the open edges of the pocket piece. Make sure you keep the main section fabric out of the way.

IMG_0217

Don’t worry if it isn’t neat, as it will be hidden away!

IMG_0218

Here is your complete pocket section 

Sit back and admire your work!

I’m not a camera bag

I have finished the second; what I am calling the “I’m not a camera bag” bag, aka the Pyramid Bag by designer Izzy (see previous post for details).

This one easily fits a bridge camera like my Canon SX50 HS, with some extra room.  It has two small internal slip pockets, to place a spare battery, or SD Cards.

This one turned out great, I added some fusible fleece, and other interfacing to give it more structure.  I have also padded out the bottom.

I am loving the colours of this one.

Talking to hubby, he was suggesting some pattern hacks to customise this bag.  So will give it a go with some additional pockets, maybe a zipper pocket.  Thinking of a larger size to accommodate an DSLR!  Watch this space

camera_Bag

 

Second cut

So this evening so far, I have finished cutting out the second Pyramid Bag, and this time I have used a mix of fusible interfacing.  (Jeez I hate ironing!!)  The pattern doesn’t call for any, but I think this will make it much better.

Loving the colour combo of this one.

IMG_0174.JPG

Pyramid Bag

Sew here’s a little something I whipped up this afternoon.

However, I did make a boo boo, and had to unpick and restitch!

This pattern is by Izzy Meim Saab called the Pyramid Bag

The next one I make I will add some extra interfacing, but as a first attempt it’s pretty good.  Ideal as a small camera bag!

pyramid bag

Pyramid Bag